Specifications

Issue 2 - May, 2004 Talkpath - Digital Voice Processing System Technical Manual
Overview
After connections are established (see Section 2), the system accepts calls. Remember that the
laptop/PC administration or telephony administration (limited access) can be used to configure
the Digital Voice Processing System unit. This section describes the telephony administration.
Access the system as the system administrator and perform the following steps:
1 Dial any of the extension numbers connected to the Digital Voice Processing System.
2 The system responds with:
Thank you for calling. If you know your party’s extension you may dial it now. If you know your
party’s name but not their extension, please dial [4]. To reach an operator dial [0] or remain on
the line. To listen to the instructions again, dial [
✳].
If the system is in night mode, it plays:
Thank you for calling. Our offices are closed. Please call back at a later time.
If the greeting was re-recorded, a different prompt plays.
3 To access voicemail, press [7].
4 Enter mailbox number.
5Press [
✳] followed by the password. The default password is 0000.
6 Press [7] to access administrator functions. If the mailbox is not in the supervisor Class of
Service, the system prompts for the administrator password. The default administrator
password is [2275]. The password must be entered within 3 seconds.
4 Online Administration
NOTES
With the online administration, data is entered only
through a touch-tone telephone. The Admin Password can be
changed in the Registry (only by using the laptop/PC).
If you have not configured your phone system, do so now.
Refer to Section 2 for information.