Specifications

Installation 2-7
Phone System Programming and Voicemail Setup
Talkpath - Digital Voice Processing System Technical Manual Issue 2 - May, 2004
Phone System Programming and Voicemail Setup
Follow these steps to program the phone system:
1 Determine the extensions connected to the voicemail system.
2 Go to station 100 for programming.
3 Enter Admin Mode by dialing [
✳✳3226].
4 Program the system date and time:
a Press [Flash 11]. The following message displays:
b Choose the display format by pressing the appropriate flexible button.
[Button 1] LED Off = 12 hour display format
[Button 1] LED On = 24 hour display format
c Enter the date and time: YYMMDDHHMMSS (military format).
dPress [HOLD].
5 Program the Voicemail Group:
a Press [Flash65, button 1]. The following message displays:
Where:
AAA = Alternate Group
LLL = Leave Mail Index
R = Retrieve mail index from out pulsing table for retrieving messages 0-7
XXX = Voicemail Station Numbers (ports), up to 8 stations maximum in each group
b Press [Button 12].
c Enter the 3-digit station numbers. A maximum of eight stations can be entered.
6 Enable ICLID if feature is installed on the phone system. Otherwise, skip to the next step.
a Press [Flash 56, button 1].
b Press [HOLD] to save.
DATE & TIME
MMM DD YY HH:MM
VM 440 AAA LLL R XXX,XXX,
XXX,XXX,XXX,XXX,XXX,XXX