Specifications
Installation 2-5
Selecting Phone System Integration
Talkpath - Digital Voice Processing System Technical Manual Issue 2 - May, 2004
Selecting Phone System Integration
Table 1 lists the available Vodavi phone systems, with their corresponding phone system number
and the section in which they appear in this manual.
After setting up the phone system, the voicemail must be set up to match the phone system to
which you are connecting. The default phone system setting is: 000 (3 digits, blind transfers).
Change the phone system setting using Laptop Administration (see Section 5) or using the phone
(see Section 4). You can select the desired phone system by entering the 3-digit number of the
phone system configuration file to load.
To select a phone system via telephone-based administration, follow these steps:
1 Dial any extension number connected to the voicemail system, not the voicemail hunt grp
.
2 The system answers with:
Thank you for calling. If you know your party’s extension, you may dial it now. If you know your
party’s name but not their extension, please dial [4]. To reach an operator, dial [0] or remain on
the line. To listen to the instructions again, dial [
✳].
If the system is in night mode, it plays:
Thank you for calling. Our offices are closed. Please call back at a later time.
If the menu greeting was re-recorded, a different prompt plays.
3 To access voicemail, press [7].
4 Enter mailbox number 100.
5Press [
✳] followed by the password for the mailbox. The default password is 0000.
6 Press [7] to access administrator functions. If the mailbox is not in the supervisor Class of
Service, the system prompts for the administrator password. The administrator password
(default is 2275) must be entered within 3 seconds.
7 Press [8] for system administration.
8 Press [2] to select a phone system.
9 The system then prompts for a phone system number. Select the number for the system
that best matches your phone system from Table 1.
10 The system confirms your input, then resets.
11 Once the system restarts, Voice Processing System is configured for your phone system.
After selecting a phone system, the next step is to set the date and time on the Digital Voice
Processing System. Refer to Section 4.
NOTES
You may use laptop/PC administration or telephone-based
administration to configure the Digital Voice Processing System.