Specifications

Issue 2 - May, 2004 Talkpath - Digital Voice Processing System Technical Manual
D-10 System Log and Error Messages
Error Messages
003 Sys: *Mark Dead scr=%d addr=%d mark=%2X l=%d v
Internal marker overwritten. Internal Digital Voice Processing System error.
003 Sys: *String Overflow(cat) d_max=%d d_len=%d s_len=%d
Attempt to set variable to a value that is too long. Module error.
003 Sys: *String Overflow(sv) d_len=%d d_max=%d s_len=%d
Attempt to set variable to a value that is too long. Module error.
003 Sys: *Task Mssg(%d,%s) BEFORE Answer*
Unprocessed message received from other task thrown away prior to going into answer
mode. Module error, modules for multi-tasking systems should process all messages
received prior to going into answer mode.
003 Sys: LineDown = %d*
Log message indicating a line was shut down by module command. Not an error.
004 Sys: * Can't concat sys segment (too many)*
Error concatenating voice segments from the system voice file (hellosys.vox). The Digital
Voice Processing System limit reached. (maximum 30 segments) Probably too large too
large a number in SayNumber or SayMoney, too long a string in SayChars, etc.
004 Sys: * Can't find sys segment *
Unable to find a voice segment in system voice file (
HELLOsys.vox). Missing file or module
error.
004 Sys: * Can't find voice message :%s/%s *
Unable to find a voice file. Missing file or module error.
004 Sys: * Can't open voice index (memory) *
Unable to successfully open a permanent voice index, due to insufficient memory for
segment table. Not enough memory before running the Digital Voice Processing System.
004 Sys: * Invalid Definition #%d in Voice Index *
Error reading segment information from VDX file. Indicates error in VDX file format.
004 Sys: * No Segments in Voice Index *
No segments found in VDX file. Indicates empty VDX file.