Specifications

Command Files B-3
Command File Structure
Talkpath - Digital Voice Processing System Technical Manual Issue 2 - May, 2004
Debug= <On|Off> Turn CommFile debugging on or off.
CallMailboxWhere Call the number in the glb_mailbox Where field.
DialMailboxWhere Dial the number in the glb_mailbox Where field.
DialMailboxBeeperFile Dial the digits found in B <mailbox>.MSG.
DayOfWeek <0-6>= <Command ...> Execute if today matches the day of the week.
Time <HH:MM>- <HH:MM>= <Command ...> If the current time falls between the times
execute the command. First time is lowest.
DeliverNewFax= <Dtmf String> If there are new faxes for this mailbox deliver
them to the number specified or to the mailbox
Where field if none specified. Always uses
GlbMailbox.
WhereFieldIsNotifyTimed= <On | Off> Selects whether the WhereFields are taken from
the current time period (Off) or the time period
for the notification.
CancelPendingNotifies Cancels all pending notifications for this mailbox
and deletes all queued notification requests. It
does not modify paging files.
PlayVoicePage Plays the next voice page file. Only used on voice
pagers. Most systems use PlayFirstMessage.
DialPrefixForWhereField Dial the prefix assuming dial the
mailboxWherefield is dialed.
DeleteAllPages Delete all pager files (beeper files) associated
with the global mailbox.
ProcessNextEvent Process the next event for this channel group.
This speeds up event handling because the
channel does not return to the wait state. If the
next event is a notification event, the system can
process it much more quickly than if the
command file did a Quit and returned to the
main loop. If no events are due for this channel,
the next instruction in the command file after
ProcessNextEvent executes.
AbortIfNoPages If no paging (beeper) files exist, abort (Quit) the
command file.
Command Description
Table B-2. Command Files (Continued)