Specifications

Issue 2 - May, 2004 Talkpath - Digital Voice Processing System Technical Manual
Hardware Requirements
To install the Talkpath Voice Processing System, the following hardware is required:
❐ 4 6/32 x 1 inch long screws (1 inch long #6 wood screws may also be used) and the
applicable wall anchors to mount the voice processing system to the wall.
❐ Screwdriver
❐ Phone switch
❐ Power connector supplying 110V AC
❐ 8 AA alkaline batteries (not supplied)
Unpacking Unit
When unpacking the unit, be sure you have:
❐ Talkpath Voice Processing System unit
❐ Power supply
Figure 2-1. Low Voltage Power Supply
❐ Windows Administration diskette
❐ 9-pin null modem cable for laptop/PC administration
❐ Talkpath Voice Processing System manual
2 Installation