Specifications

Technical / Troubleshooting 7-19
Restoring System Backup
Talkpath - Digital Voice Processing System Technical Manual Issue 2 - May, 2004
3 At the C:\HELLO> prompt, type BACKUP3 and press [Enter]. A confirmation displays to
backup the system.
4 Press [Enter]. The backup completes and the system prompts to download the system
backup.
5 Press any key to begin the download. To not download the files, press
[CONTROL]+[SHIFT]+[C], then press [Y].
Restoring System Backup
The instructions below describe how to restore a system backup. To restore data on the Digital
Voice Processing System, the system must be parked first.
The following are general instructions for restoring backup files. Connect the Digital Voice
Processing System unit to the host computer, then use these DOS commands:
1CD \
2 ERASE BACKUPx.ZIP
3ZMR BACKUPx.ZIP
4 PKUNZIP -D -O BACKUPx.ZIP
5REBOOT
Restore the backup of the Digital Voice Processing System at three levels. The first level is to
restore databases that contain subscriber, COS, menu, time control and system settings. To
transfer files from the host system and unzip them, connect the Digital Voice Processing System
unit to the host computer, then use these DOS commands:
1CD \
2 ERASE BACKUP1.ZIP
3ZMR BACKUP1.ZIP
4 PKUNZIP -D -O BACKUP1.ZIP
5REBOOT
NOTES
If [CONTROL]+[SHIFT]+[C] is pressed, the backup must be
downloaded later.
NOTES
BACKUPx.ZIP represents the name of the file to restore,
and x is a variable for any number or character.