Specifications

Technical / Troubleshooting 7-17
Transferring Files
Talkpath - Digital Voice Processing System Technical Manual Issue 2 - May, 2004
Transferring Files
The Digital Voice Processing System can transfer files via the ZModem protocol. Since the Digital
Voice Processing System communicates at 9600 baud, it is suggested to use ZIP compression on
files before transfer.
Before file transfer occurs, the Digital Voice Processing System must be parked. Once the system is
parked, use ECom and DOS commands to navigate through the directory structure. Change the
directory to the location where files are uploaded or downloaded.
To transfer files from the PC to the Digital Voice Processing System (upload) the steps are:
1 Park the system.
2 Make sure the file is prepared (edited, saved, compressed, etc.) on the laptop/PC.
3 On the Digital Voice Processing System, get into the DOS directory where the file is to be
uploaded.
4 Ensure the file does not already exist.
5 On the Digital Voice Processing System execute a
ZMR (Zmodem Receive) command.
6 From Ecom, select upload a file using the Zmodem protocol. Then select the file to send.
7 After the file transfer completes, the DOS prompt displays.
To transfer files from the Digital Voice Processing System to the PC (download):
1 Change directories on the Digital Voice Processing System to the file location.
2Run
ZMS (Zmodem Send) with the file name and the extension. For example, to download
the file
TEST.ZIP from the Digital Voice Processing System, run: ZMS TEST.ZIP
3 The terminal emulation program then downloads the file.
4 After the file transfer is complete, the DOS prompt displays.
NOTES
Advanced users can use fast ZMS and fast ZMR.