Specifications

Issue 2 - May, 2004 Talkpath - Digital Voice Processing System Technical Manual
7-12 Technical / Troubleshooting
ECom
To display more logging information in the unit, add a registry parameter ModuleDebug.
ModuleDebug accepts several parameters as shown in the following table:
For example, to see if the menus and time controls are configured correctly, go into Admin
module and insert the ModuleDebug name with a value of
TcMn. Or, access the system via ECom
and at the DOS prompt type
REGADD “ModuleDebug=MmTc”
Module Debugging must be turned off when troubleshooting is complete. To turn off Module
Debug, type
REGADD “ModuleDebug=”
Download
Upload and download files to the Digital Voice Processing System in ECom. To download or send
a file from the Digital Voice Processing System to the laptop/PC, do the following:
1 Make certain the Digital Voice Processing System is shut down and parked.
2 From the C:\HELLO> prompt, type ZMS <filename> and press [Enter].
3 The system displays a status screen (shown below).
4 When the download is complete, the system returns to the C:\HELLO> prompt.
Basic Foundation H! Voicemail Vm
Auto Attendant Aa
Menus Mn
Voicemail Owner Vo
Directory Di
Events Ev
Message Manager Mm
Time Control Tc
Integration In
Command File Cf
Database Db
Distribution List Dl
Notification No
Table 7-1. Module Debug Parameters
NOTES
If the file to download is not in the C:\HELLO directory,
move to the correct directory to type the ZMS command.