Specifications

Technical / Troubleshooting 7-11
ECom
Talkpath - Digital Voice Processing System Technical Manual Issue 2 - May, 2004
Debug Mode
From the DOS prompt the voicemail system can be brought up in debug mode. If VMDEBUG is
typed at the C:\HELLO> prompt, the system comes up in a communicative mode. In debug mode,
the Administration program will not run. The following screen shows how the voicemail looks
when the system is ready to take calls in its non-stealth mode.
Figure 7-5. Debug Mode
Note that the system displays the log line:
I!XSIAM Info: XSIAM Shutting down for a short nap
The system is ready to receive voicemail calls. Logging information displays on the ECom screen
and is written to the logs.
To exit Debugging mode, press [3] from the ECom screen. The voicemail system is parked again.
To restart the voicemail system, type REBOOT and the system reboots. It is then safe to exit the
ECom program.