Specifications

Issue 2 - May, 2004 Talkpath - Digital Voice Processing System Technical Manual
7-6 Technical / Troubleshooting
Boot Up Problems
REGADD: DisableXSIAM=1
C:\HELLO>chk_port
10/13/98 13:28:13 SETPORT (Build:2) VSI Channels=8 Registry Channels=8 Return Er
ror Level=0
REGADD: DisableXSIAM=0
Configuring system...
Modem to auto-answer...
AT
AT S0=1 Q1
Loading voice engine...
+OK
Boot Up Problems
Q: All lights on the system turn on and the system appears to boot normally, but calls are
not being answered.
A: The cable from the motherboard to the voice card(s) is not connected. Open the
voicemail unit and reconnect the voice cards to the motherboard.
Q: The system boots properly and the batteries are installed. When the power is
removed, then is re-applied, the date and time are not maintained.
A: Check the status of the batteries. Make sure they are seated properly and are
charged. Also, open the unit and make certain the battery connection is tight, via
JP10.
ECom
ECom is the communications program shipped on the Laptop/PC Administration diskette. ECom
is a 16-bit Windows program that communicates directly with the Digital Voice Processing
System and provides access to DOS functions and debugging information.
It is suggested to use the supplied ECom application because Ecom supports transferring of files
between the Digital Voice Processing System and the PC, via the ZModem protocol.
NOTES
Anytime the system is accessed via ECom, Laptop/PC Admin
must be shut down.