Specifications

Issue 2 - May, 2004 Talkpath - Digital Voice Processing System Technical Manual
6-4 Upgrading
Upgrading Ports
6 Using Ecom, enter the following DOS commands:
CD\ [Enter]
ZMR [Enter]
7 Use Ecom to send the two files located on the diskette (NEWKEY.KEY and PORTUP.BAT) by
pressing the PgUp key. Select Zmodem transfer. Browse for the A: drive and select both
files, click Add and OK. Start the upload to the voicemail system. See Section 7 for more
information on file uploading.
8 After a successful upload, execute the following DOS commands:
PORTUP [Enter]
REBOOT [Enter]
9 As the system reboots, the new ports are activated (the LEDs for active ports are all solidly
lit when the reboot completes).
Make test calls to all ports to verify that the upgrade completed successfully. If problems exist,
refer to Section 7, Technical/Troubleshooting or contact Technical Support for assistance.
Now that your port count has increased, phone system programming must be modified (Flash
65, button #12) to accommodate the new ports. The last port in the voicemail group must be
connected for message waiting indicators, notifications, etc. to work properly.
NOTES
If any other LEDs remain lit, refer to Section 7, Techni-
cal/Troubleshooting.
NOTES
All ports return to their default configuration and must
be reconfigured to their original setting prior to placing
the Test Calls.