Specifications

Laptop/PC Administration 5-9
Software Description
Talkpath - Digital Voice Processing System Technical Manual Issue 2 - May, 2004
❐ Voice Lines
Use this button to administer voice lines.
❐ Reset
Use this button to reset the current screen.
❐ Shrink
Use this button to reduce the expanded screen to its default size.
❐ Exit
Use this button to exit the laptop/PC administration
program.
Menu items are also accessed using a pull-down menu.
Status Bar
The following screen illustrates the status bar located at the bottom of the Digital Voice
Processing System option screens:
Figure 5-8. Status Bar
The status bar provides an explanation for each button on the main menu. For example, if the
Time Control button is highlighted, the status bar reads: Display Time Controls
Note the four signal indicators at the bottom of the screen. The Carrier Detect (CD) option is lit as
long as there is a carrier signal between the two modems, or between voicemail and the
laptop/PC. The Data Send Ready (DSR) option is lit as long as there is a carrier signal between the
two modems, or between voicemail and the laptop/PC. The CD and DSR are solid green on direct
port connection. The Transmit (Tx) option blinks whenever data goes out, and the Receive (Rx)
option blinks when data enters. If the connection is lost, the screen reduces and the following
screen displays:
Figure 5-9. Remote System Not Responding Message