Specifications
2-74 CO Line Group
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the CO LINE GROUP ACCESS flexible button (Button #8). The following message
displays:
6. To add a Line Group, enter a valid number (00, or 01–23) to designate the outside line
groups that the station can access, press 1, and then press HOLD to save the entry. A
confirmation tone sounds and the display updates.
7. To delete a Line Group, enter a valid number (00, or 01-23), press 0, and then press HOLD.
A confirmation tone sounds and the display updates.
DEFAULT … Stations are allowed access to Group 1.
Conditions
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
CO Line Group Programming
Description
Twenty four line groups are available for CO line assignment. Groups should be assigned
according to type (local, FX, WATS, etc.). All unassigned CO lines should be programmed into
a different group so they are not accessed by Line Queuing, Pooled Group access (Pool
Buttons), Speed Dial, or LCR features.
Any Line Group can be used for programming a line(s) as private; for private lines, assign Line
Group access to only one station in Flash 50/51, Page B, Button #8. Ordinarily, use Line
Group 0 as a private line. Also, all unused CO Lines should be placed in Line Group 0.
CO Lines assigned to a Line Group 0 can only be accessed by stations with a direct CO
appearance (button) on their phone.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE B
ENTER BUTTON NUMBER
SXXX PAGE B
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
LINE GROUP ACCESS 01-23
1
00+1+HOLD = No Access (911 calls are blocked unless 911 Feature is active).
01+1+HOLD = Access to Group 1 by dialing Code 9 or 801(Code 800 if 911
Feature is active).
Users access Line Groups 2-23 by dialing 802-823, respectively.