Specifications

Call Forward - Preset 2-39
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Internal DND Destination
1. Press Button #22 to access Flash 50/51, Page D programming, then press Button #3. The
following message displays:
2. Enter a valid flexible destination number (if a 3-digit number, add a leading 0) and press
HOLD.
3. To delete the entry, press the [#] key and then press HOLD.
External DND Destination
1. Press Button #22 to access Flash 50/51, Page D programming (if necessary), then press
Button #4. The following message displays:
2. Enter a valid flexible destination number (if a 3-digit number, add a leading 0) and press
HOLD.
3. To delete the entry, press the [#] key and then press HOLD.
Conditions
» The No Answer Timer controls both Manual and Preset Forwarding (feature code 640
forwarding and FLASH 50, Page C, Buttons #1-4 and 14-17.
» Station Forwarding overrides the Preset Forward settings.
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
Preset Call Forward - CO Line
Description
The Preset Call Forward Destination feature enables a CO line to initially ring at multiple
stations and forward to a pre-determined destination. The destination can be a station
(DKT-SLT), Voice Mailbox, UCD group, or Hunt group. Each CO line has a Preset Forward
Timer. Each CO line also has a VMID field to allow sending of specific VM digits when a CO line
forwards to a VM group. Calls ringing into UCD Groups or Voice Mail Groups continue to ring
the group. The CO line does not forward when ringing one of these types of groups.
INTERNAL DND FWD
####
EXTERNAL DND FWD
####