Specifications

Database Upload/Download Routine E-9
Customer Database Programming
STARPLUS STSe - Programming & Operations Manual August 2005
HYPERTERMINAL -- Downloading a Database File
After opening HyperTerminal, and the New Connection screen displays, complete
the following steps:
1. Type connection name and select appropriate icon, then click <OK>.
2. When the Phone Number screen displays, change the setting in the Connect Using box
to: Direct to COM1, and then click <OK>.
3. Once the COM1 Properties screen displays, change the settings as shown, and then click
<OK>.
 Baud Rate = 9600
 Parity = None
 Data Bits = 8
 Stop Bits = 1
 Flow Control = Xon/Xoff or None
4. Press <Enter> and complete the following fields:
5. On the tool bar, click <Transfer> and select Receive File.
6. Change Receive Protocol setting to XMODEM, and click <Receive>.
7. Type database filename and click <OK>. The Adm> prompt displays when the file transfer
is complete.
Screen Fields Action
ENTER PASSWORD: Type password: XXXXVODAVI
(XXXX = default password for online administration)
ADM>, Type program number.
ADM>86 Load database routine.
Type button number.
ADM>W Download database.
Press HOLD button.
ADM> Press <Enter> key twice.