Specifications

Programming the Voice Mail System D-31
Hard Drive-Based Voice Mail
STARPLUS STSe - Programming & Operations Manual August 2005
System Line Menus
The Voice Lines window allows you to view voice line actions. The feature defines how the
voice mail system will answer incoming calls. Clicking on “How to Answer” for the
appropriate line, will display the System Line options where you can specify the actions for
the line you selected.
System Configuration Menus
In the left window, double-click on “System Configuration” to display other menu choices.
Then select the desired menu: Module, Registry, License, IP Addressing, or KSU Clock Control.
SYSTEM LINE Options
Description
DEFAULT LINE
Click on the ELLIPSES button […] to open the “What to Run” window. Then select
which module you want the system to follow. When available, the appropriate
options will also display. Refer to “What to run, modules” on page D-27.
How to Answer
PBX Name STSe system, by default
LINE (1-8) The Voice Lines function displays the number of voice lines for which your STSe
system installation is configured.
How to Answer Refer to description above …
Event Group The system allows you to group lines that can handle certain types of outbound
tasks. Leave this setting blank for lines that will not handle outbound tasks.
Typically, 5 is used for basic notification, paging, and MWIs. Values = 0-9
Blockage Group This setting allows you to monitor the voice mail traffic. Each line can be placed in
a “Blockage” group so that when all of those lines are busy, no new calls will be
received. The information may be used to verify that voicemail has enough ports
to support your company’s call traffic. Values = 1-9
PBX Name STSe system, by default
SYSTEM CONFIGURATION
Description
MODULE SETTINGS The system uses this information to determine how many digits to expect
when asking a caller for a mailbox, extension, or password.
Digit Lengths
MAILBOX LENGTH - maximum digits = 7 / default = 3
EXTENSION LENGTH - maximum digits = 7 / default = 3
PASSWORD LENGTH - maximum characters = 9 / default = 4