Specifications

C-32 Programming the Voice Mail System
Flash-Based Voice Mail
STARPLUS STSe - Programming & Operations Manual August 2005
Selecting an STSe Numbering Plan -- Use the arrow keys to scroll to the desired number
corresponding to the desired numbering plan, then press the <ENTER> key. Your selection is
displayed in the Screen in Effect field.
For example, if you scroll to 00 for Vodavi STSe 3 Digit numbering plan and press <ENTER>,
the Screen In Effect field displays 00.
Changing a Parameter --
In cases where you need to change a parameter used by the PBX integration screen, perform
the following steps:
1. Use the arrow keys to scroll to select your PBX integration, then press the <ENTER> key.
2. Press the <ENTER> key a second time to display the next PBX Integration Screen.
PBX Integration Programming - (Sub Menu)
Figure C-17: PBX Integration Screen (2 of 2)
It is only necessary to select the specific STSe numbering plan as shown in Figure C-
16. Parameters for the selected STSe numbering plan (shown in Figure C-17) do not
need to be modified unless under the direction of Technical Support personnel.
Changing from one PBX integration to another will wipeout all of the existing
mailboxes and there is no way to recover them.
Field Description
PBX CODE
Number the system uses to determine which PBX screen to reference for system
parameters.
Example -- If 01 is selected as the PBX Integration, the system will use the entries located on
screen 01 to determine integration patterns, MWI on & off codes, etc.
NAME
Descriptive name used to visually identify the particular Integration Screen. This name is
the one displayed in the PBX Integration Selection Menu.
Review
description
in following
table