Specifications

C-18 Programming the Voice Mail System
Flash-Based Voice Mail
STARPLUS STSe - Programming & Operations Manual August 2005
 While working on a particular screen, use the arrow keys or the <ENTER> key to move
through the fields. After you change a given field, press the <ENTER> key to save your
change.
 If you are working in an area with multiple pages, such as the mailbox screen, press <F1>
to go forward one screen and <F2> to go back one screen.
 When you finish work on a particular screen, press the <ESC> key to return to the
Programming Menu.
 When you finish programming, type exit and press the <ENTER> key to shut down the
programming interface.
 Access to the Flash-based Voice Mail is protected by password to prevent unauthorized
changes to voice mail system parameters.
(The voice mail password must be entered each time you access the Programming area.)
Menu Option Screens
Signing On
This is the screen first shown when the programming terminal is connected.
Figure C-1: Sign-On Screen
To enter the programming area, type in the correct password, then press <ENTER>.
The default factory password is 0000. It can be changed by selecting Option 8 on the
Programming Menu.
The Flash-based Voice Mail displays the Programming Menu shown in Figure C-2.
The <TAB> key does not provide field-to-field movement.