Specifications

Programming LCR Tables B-19
Appendix B - Least Cost Routing
STARPLUS STSe - Programming & Operations Manual August 2005
Conditions
» The user must have LCR enabled to get the Call Cost Display.
» When Call Cost Display is enabled, it changes the entry format for FLASH 75, Button #4 to
include an entry of the cost for one minute.
Initialize LCR Tables
Description
The LCR Tables may be initialized to set all tables to their original, default values. The
following tables are reset to their original default value after initialization of the LCR Tables:
Programming Steps
1. Press the LCR TABLES flexible button (FLASH 80, Button #7). This message displays:
2. Press the HOLD button. A confirmation tone sounds.
Table B-2: LCR Table Defaults
Program
Code
Flexible
Button
Features
Default Value
(after initialization)
FLASH 75 LCR TABLES
1 3-Digit Area/Office Code Table
None
2 6-Digit Area/Office Code Table
3Exception Code Table
4Route List Table
5 Insert/Delete Table
6 Daily Start Time Table
7Weekly Schedule Table
8 LCR Routing for Toll Information Table 0
INITIALIZE LCR TABLES
PRESS HOLD