Specifications

Programming LCR Tables B-7
Appendix B - Least Cost Routing
STARPLUS STSe - Programming & Operations Manual August 2005
6-Digit Office Code Table
Description
The 6-Digit Office Code Table determines a route for one or a group of individual office codes
within an area code. Certain office codes within an area code can be given unique or special
routing. If the office code dialed is not found in the 6-digit Office Code Table, the call is then
routed according to the route list table as was entered in the 3-digit table.
The system allows twenty 6-digit Area/Office code tables (up to 800 entries per table) that
may be used to route specific office codes within an area code. Each table routes calls for a
common area code to a specified route. All entries made to a table route those office codes to
the specified route list table. An area code may be entered into more than one 6-digit table
with different routes specified.
Programming Steps
1. Press the 6-DIGIT TABLE flexible button (FLASH 75, Button #2). The following message
displays:
 = [0] to remove codes, [1] to add codes
AAA = Area Code
RR = Route Number 00-15
NNN = Office Code
2. Press the HOLD button to save the entry. A confirmation tone sounds and the display
updates.
3. Enter additional office codes to be programmed into the same Area Code/Route Table,
pressing HOLD after each office code entry.
4. Press a flexible button to program a different table.
To Delete All Entries in an Area Code/Route Table:
Enter [0 AAA RR ###].
6 DIGIT ROUTING TABLE
ENTER
 AAA RR NNN HOLD