Specifications

A-4 Functional Performance
ICLID / Caller ID
STARPLUS STSe - Programming & Operations Manual August 2005
Functional Performance
Description
The key system operation of the ICLID feature is dependent on the feature first being
activated from the central office so that the numbers of the calling party are delivered over
the individual tip and ring of the CO lines during the first silent interval between ringing.
The features implemented are:
 Display of calling number/name on initial ring-in of a line on the display keysets.
 Recording of incoming call number/name on the SMDR printout.
 Management of an Unanswered Call table from a display phone with appropriate
privilege level to allow tracking of unanswered calls for statistical information and return
call management.
 Local translation of incoming numbers to names according to a table of number/name
equivalences which can be administered by the system.
Caller ID Name/Number
Description
The Caller ID Name/Number feature lets a station user with a display keyset program a
flexible button to view the number and name on the LCD when receiving a Caller ID CO call.
If the feature is enabled, use flexible button [653], the LED is lit solid and the name/number is
displayed. During the call, the user can press the flexible button to view the normal call
information. The LCD displays the number of the caller on the top line the name on the
bottom line.
Operation
To program a Caller ID Name/Number button:
1. Press [SPEED] + [SPEED].
2. Press the desired flexible button. A confirmation tone sounds.
3. Dial 653 (Caller ID Name/Number code).
DEFAULT … No button is assigned on telephones.
 SINGLE LINE TELEPHONE
The Caller ID Name/Number feature does not apply to SLTs.
Conditions
» When enabled, this display overrides transfer call LCD messages, Call Pickup messages,
and Answer messages. If the user wishes to view the Line Number/Call Timer and the
standard call information, they can press the flexible button to toggle between the
name/number and normal mode.
» A flexible button must be programmed for this feature to operate.