Specifications

Back Light Display 2-17
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
2. Press the Volume Bar to change the volume. The following message displays:
 SINGLE LINE TELEPHONE
The background music feature is not compatible with single line telephones.
Conditions
» When you pick up the handset or press the ON/OFF button, music automatically
discontinues.
» When the headset is enabled, BGM discontinues.
» A music source must be connected to the BGM/MOH connector.
Back Light Display
Description
The STSe Key Telephone Unit can be programmed so that its LCD display background is lit.
The three options for Backlight Display are:
 Off - No Back Light Display.
 On - Back Light Display always on during active calls or in an idle condition.
 In Use - Back Light Display only during active calls or when keypad or flexible buttons are
pressed. The LCD will remain lit for 30 seconds after the call is completed.
Programming
To program the Back Light Display feature:
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [101 101].
-or-
Enter a valid flexible number (100-8999) to be programmed.
SPEAKER BGM [#########]
MMM DD YY HH:MM am
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
STATION ATTRIBUTES
SELECT A STATION RANGE
ENTER STATION NUMBER
If HOLD is pressed without entering a station range, All stations are selected.