Specifications

Speed Dial - System Storing 3-25
Attendant Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Speed Dial - System Storing
System Speed numbers must be entered by the first programmed Attendant. If no Attendant
is specified, enter at Station 100.
1. Press SPEED once, then press desired outside line key; or select an outside line
automatically by pressing the SPEED button twice.
2. Dial the System Speed bin location (9020-9099).
3. Dial telephone number.
4. Press the SPEED button.
5. Hang up.
 Pressing the TRANS button during number entry initiates a Pulse-To-Tone switchover.
 Pressing the HOLD button during number entry inserts a Pause.
 Pressing the FLASH key inserts a Flash into the speed number.
 Pressing the TRANS button as the first entry in the speed bin inserts a no-display
character causing the numbers stored in the bin not to display on the Digital
Telephones when the bin is accessed.
Speed Bin numbers 9060-9099 are NOT monitored by Toll Restriction.