Specifications

Attendant Directory List Programming 3-9
Attendant Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Attendant Directory List Programming
Description
Directory Dialing enables display telephone station users to obtain a directory of station
users and have the system dial the extension currently displayed. The STSe system provides
locations for up to 200 names (000-199). Directory dialing also lets the Attendant program a
name with a speed dial bin for use in later locating a speed dial number. When prompted, the
system displays the name associated with a speed dial number so when the desired name is
shown, the user may then have the system dial the number.
Programming Steps
To access Directory List programming, dial the Directory List program code [693]. The HOLD
button illuminates.
The first entry (000) in the Directory List is shown on the display.
AAA = Directory List entry number (000-199)
XXXX = Either:,
A 3- or 4-digit station number (100-8999)
-or-
A 3-digit local number/name translation table number
(600-799 minus assigned station numbers that would
overlap)
-or-
A 4-digit system speed bin number (9020-9099)
nnn = Programmed Name (blank if none)
The following procedure is used to enter, edit, and erase names in the Directory List for
stations or speed dial numbers.
1. Enter desired 3-digit Directory List number (000-199), or dial [
] to scroll up (next entry)
or [#] to scroll down (previous entry) through the list.
If just changing a name associated with an existing station, skip to step 4.
2. Press TRANS.
3. Enter the 3- or 4-digit station intercom number.
4. Press MUTE.
DIR LST AAA BIN/ICM: XXXX
nnnnnnnnnnnnnnnnnnnnnnn