Specifications

2-326 Toll Restriction
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Initialize Exception Tables
Description
The Exception Tables parameters, including the Allow/Deny Tables and the Special Tables,
may be initialized setting all tables to their original, default values. The following Tables are
cleared returning to their default value upon initializing the Exception Tables parameters:
Programming Steps
1. Press the EXCEPTION TABLES flexible button (FLASH 80, Button #5). The following
message displays:
2. Press the HOLD button. A confirmation tone sounds.
Table 2-28: Exception Table Defaults
Program
Code
Flexible
Button
Features
Default Value
(after initialization)
FLASH 70 TOLL RESTRICTION
1 Allow Table A Programming None
2 Deny Table A Programming None
3 Allow Table B Programming None
4 Deny Table B Programming None
5 Special Table 1 Programming All Codes Denied
6 Special Table 2 Programming All Codes Denied
7 Special Table 3 Programming All Codes Denied
8 Special Table 4 Programming Home
9 Area Code for Special Table 1 None
10 Area Code for Special Table 2 None
11 Area Code for Special Table 3 None
12 Displaying Toll Table Entries None
INITIALIZE EX TABLES
PRESS HOLD