Specifications
Text Messaging (Silent Response) 2-317
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Additional messages (with their codes listed below) can also be sent as a text response:
SINGLE LINE TELEPHONE
Not applicable
Conditions
» If the station receiving the text message response is on an OHVO call, no tone is received.
» All canned and custom messages may be used to respond to a calling party.
» Text response messages automatically clear when the calling station (station receiving
the messages) goes on-hook.
» A station can receive only one message at a time.
» Text messages may be chained (i.e., multiple messages sent to one caller).
» Text message responses appear on the calling station and the receiving station (station
activating text responses) LCD displays.
» If the calling station is a non-LCD telephone, the receiving station receives error tone
when responding via text messaging.
» The receiving station may press a flexible button programmed as a Text Message button,
[633+#]. Press this flexible button and dial the 2-digit message number (31-51) to
respond to the calling station. DTMF digits are not heard by either party.
» When silent messaging is used to respond to a call, the existing call of the called station is
not disconnected while the messages are sent to the calling station.
» The calling station must remain off-hook to receive silent messages.
» If the receiving station responds with a text message, the text message displays on the
LCD.
» Each message may be programmed onto a flexible button, including a flexible button on
a DSS/BLF console.
[31] = I Will Take Call [38] =Who Is It? [45] = Park Call
[32] = Take Message [39] =Is It Long Distance? [46] = Out Of Office
[33] = Transfer To Secretary [40] =Is It Personal? [47] = Put Call Through
[34] = Put Call On Hold [41] =Is It An Emergency? [48] = I Am Busy
[35] = Call Back [42] = Is It Important? [49] = O.K.
[36] = One Moment Please [43] = Is It Urgent? [50] = No
[37] = I Will Call Back [44] = Send Call To Voice Mail [51] = Yes
The calling station must be a display telephone and the receiving station must
be a keyset.