Specifications

Tenant Groups 2-313
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Attendant Station Assignment for Tenant Groups
Description
Any six Digital Telephones in each Tenant Group can be assigned as Attendant stations.
These stations receive recalls and can place the system into Night Service. The Attendant
station must be a digital display telephone.
Programming Steps
1. Press FLASH and dial [10]. The following message displays:
2. Press the desired flexible button #1-10 to select a Tenant Group 0-9 respectively.
3. Enter a valid station number (100-8999) on the dial pad, followed by a “1” to add or “0” to
delete the Attendant assignment.
4. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Station 100 is assigned as the first Attendant of Tenant Group 0. There is no
default station assignments for Attendants of other Tenant Groups.
Station Assignment to a Tenant Group
Description
A station can only be assigned to one Tenant Group.
Programming Steps
To program stations to a specific Tenant Group:
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
ATND STATIONS 100, ####
####, ####, ####, ####
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
STATION ATTRIBUTES
SELECT A STATION RANGE
ENTER STATION NUMBER
If HOLD is pressed without entering a station range, All stations are selected.