Specifications

Account Codes 2-9
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Account Codes - Forced
Description
The STSe allows arranging of the system so that all station users must enter an account code
before placing an outside call.
Account codes can also be used as a Traveling Class-of-Service to upgrade a restricted
station’s class-of-service for unrestricted dialing. Account codes must be entered before the
call when forced.
The system can force account codes on all restricted calls.
 When the Forced Account Code option is enabled, and the account code is entered, a
station’s Class of Service is upgraded to day COS1, night COS1.
 If option is disabled, a station’s COS is not upgraded but the account code continues to be
part of the SMDR record.
Programming Steps
1. Press ACCOUNT CODES flexible button (FLASH 05, Button #8) to determine whether the
use of Account Codes is forced or optional.
2. Enter a 0 or 1 that corresponds with the following entries:
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Account Codes are optional.
Operation
» If the account code contains fewer than 12 digits, dial [] to return to the intercom dial
tone or to return to the call.
» In order for an account code to become part of the SMDR record, the SMDR function
must be enabled. Refer to “SMDR Enable/Disable” on page 2-288
Prior to placing an outside line call or during an outside line call:
1. Press the preprogrammed ACCOUNT CODE button (feature code 627 - refer to “Flexible
Button Function Assignment” on page 2-163).
2. Dial account code up to 12-digits.
3. Dial [9] or CO Access code. Dial tone sounds.
4. Dial the desired number.
FORCED ACCOUNT CODE 0-1
DISABLED