Specifications

2-294 System Parameters
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
FLASH 07 FLASH RATES
1 Incoming CO Line Ringing Red 480 ipm flutter
2 Incoming Intercom Ringing Red 120 ipm flutter
3 Call Forward Button Red Steady On
4 Message Wait/VM Button Red Steady On
6 Do Not Disturb – DSS/BLF Red 60 ipm Dbl Wink Off
7 Auto Call Back – BLF Red 120 ipm flash
8 UCD Available/Unavailable – DSS/BLF Red 60 ipm Dbl Wink
9 Transfer CO Ringing Red 120 ipm flash
10 Recall CO Ringing Red 480 ipm flutter
11 Queued CO Ringing Green 480 ipm flutter
12 Exclusive Hold Green 120 ipm flash
13 System Hold Red 60 ipm Dbl Wink Off
14 In Use Hold (I-Hold) Green 60 ipm flash
15 Camp-On Button Red 120 ipm flash
16 Call Back Button Red 120 ipm flash
17 Line Queue Button Red 480 ipm flutter
18 Do Not Disturb Button Red Steady On
20 ACD Wrapup End Button Red 120 ipm flutter
21 DND Page Block Button Red 120 ipm flash
22 In & Out Button Red 120 ipm flash
FLASH 09 1-6 MOH Assignments (Channels 3-8) None
7 E911 Power Failure Station None
9Leading Digit 0
10 School Mode Disabled
11 School Forward Destination None
12 Muted Ring 0
13 Fax Route STA 148
FLASH 10 -- Attendant Station Assignment STA 100
1-10 Attd Sta Assignments for Tenant Groups STA 100 for 1st assigned in
Grp 0
FLASH 11 1 System Time And Date MMM/DD/YY, 12-hour
display
FLASH 12 -- PBX Dialing Codes None
FLASH 13 1-4 Executive/Secretary Pairs None
FLASH 14 1 Relay Programming None
Table 2-24: System Parameter Defaults
Program Code
Flexible
Button
Features
Default Value
(after initialization)