Specifications

Station Identification 2-283
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Programming Steps
1. Press the STATION ATTRIBUTES flexible button (FLASH 85, Button #3). The following
message displays:
2. To print data for:
 All stations, press HOLD.
 One station, enter the flexible station number, then press HOLD.
Then the following message displays and the requested information prints:
When the system finishes sending the requested information to the printer, a
confirmation tone sounds.
Station Identification
Description
Each system port must be programmed to identify the type of station that operate on that
port. Each station type must be identified.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
Programming Steps
By default, the system auto-detects Station ID. Use the following procedure to manually
program Station ID, if the Station ID Lock feature is enabled.
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
PRINT STATIONS
PRESS HOLD
PRINTING STATIONS
When identifying a station as a DSS/BLF console, you must also enter the station
number of the key telephone to which the DSS/BLF console is associated. To
associate a DSS console with Station 100, the entry would be 1100 [HOLD].
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
STATION ATTRIBUTES
SELECT A STATION RANGE
ENTER STATION NUMBER