Specifications

2-276 Speed Dial
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
To program multiple speed numbers:
1. Press the SPEED button twice to conclude programming a number.
2. Enter the next speed number bin to program.
If the station has no line appearance for the line programmed into the speed bin, that line
comes up under the LOOP button or POOL button when accessed.
To erase an existing speed bin:
1. Press the SPEED button twice.
2. Dial the speed bin location.
3. Press the SPEED button again. A confirmation tone sounds.
 SINGLE LINE TELEPHONE
To use speed dial:
1. Lift handset, then dial [668] on the dial pad.
2. Dial desired station or system speed bin number (9000-9099).
3. Replace the handset to end the call.
To store speed dial numbers:
1. Lift handset, then dial [661] on the dial pad.
2. Dial desired station speed number (9000-9019).
3. Dial telephone number to store.
4. Press the FLASH button. A confirmation tone sounds.
System Speed Dial Access
Description
Stations can be individually allowed or denied the ability to use system speed dial numbers
(9020-9099). (System speed numbers 9060-9099 are not monitored by toll restriction.) Stations
cannot be prevented from using station speed dial.
The first programmed Attendant must enter the System Speed numbers. If an Attendant was
not specified, system speed numbers are entered at Station 100.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
Line Group 1 is programmed along with SLT speed numbers, and thus Line
Group 1 is used when activating station speed dial from an SLT.