Specifications

2-272 Software Version (MBU)
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Programming Steps
1. Press the SLT HOOK FLASH BOUNCE TIMER flexible button (FLASH 01, Button #15). The
following message displays:
2. Enter a valid number that corresponds to 0-1 seconds in 10 ms increments.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … SLT Hook Flash Bounce Timer is set to 0.30 seconds.
Software Version (MBU)
Description
The current system software version of the Main Board Unit (MBU) can be viewed. The display
shows the version number and level of software.
Operation
To view the Software Version Display:
Dial the S/W Display code [605] on the dial pad. The top line of the LCD shows the
engineering version of the software. The bottom line of the LCD shows the features that
are enabled for your software, e.g., BASIC.
Conditions
» The station must be an LCD type to view the information.
Speakerphone
STSe Digital Telephones are equipped with a speakerphone.
Speakerphone Options
Description
The speakerphone can be programmed to work in one of three ways:
 Normal speakerphone operation.
 Disabled for outgoing and incoming CO calls, but handsfree on intercom allowed.
 Headset operation allowed.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
HOOK SWT BOUNCE 000-100
030