Specifications

2-238 Off-Hook Voice Over
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Off-Hook Voice Over
Description
Off-Hook Voice Over (OHVO) enables station users, off-hook on a CO or intercom call, to
receive a voice announcement through the handset receiver without completely
interrupting the existing call. Your voice is only heard through the handset of the called
party’s telephone. The Voice Over is muted so it does not override or drown out the existing
conversation. The called party can connect to the two parties and carry on two independent
conversations using the handset. The called party can also respond using the text messaging
feature which sends messages to the calling party’s display.
Another method provides for the receiving station to respond to an OHVO announcement
using the MUTE feature button. This button is pressed to carry on a two-way conversation
with the OHVO initiator while still listening to the original call.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
The calling station is placed in a one-time DND mode upon initiating the Voice
Over. One-time DND cannot be toggled during the OHVO call. The station receiving
the OHVO call must be off-hook and in the H mode.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
STATION ATTRIBUTES
SELECT A STATION RANGE
ENTER STATION NUMBER
If HOLD is pressed without entering a station range, all stations are selected.