Specifications

Music-On-Hold 2-227
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
MOH Assignments
Description
The MOH Assignments feature enables the system to assign CO line circuits as an additional
6 music-on-hold inputs. This increases the capacity of music channels beyond the one
available on the first installed card in the BKSU for use by a MOH source.
A maximum of seven channels are available for use on the system. By default, no channels are
assigned.
Figure 2-18: Wiring - Music Source to a CO Line
Programming Steps
1. Press the MUSIC CH # flexible button (FLASH 09, Button #1 through #6). The following
message displays:
X= 3-8
XXX = Maximum CO Lines in your system
YYY = CO Line number specified for use for this channel
2. Enter a valid number (001-XXX) that corresponds to the CO line number desired.
3. Press HOLD to save the entry. A confirmation tone sounds.
Music-On-Hold - Enable/Disable
Description
When connected to the system, a music source provides music to all lines on Hold, parked
calls, transferred calls and calls waiting to be answered by Uniform Call Distribution (UCD).
This feature is allowed or denied on a system-wide basis in programming.
MUSIC CHANNEL X 001-XXX
YYY
10 uF 10 uF
+
- - +
Resistors are 680 Ohm/ 1w.
Capacitors are 10uF/50v.
+ -
KSU
C O
Music
source
Power Supply
+24 or -48 VDC
680
Ohm
680
Ohm
120
vac
++--
V DC
V AC