Specifications
Message Wait 2-225
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the LIGHT CONTROL flexible button (Button #15).
6. Enter a valid number (0-4) to change the mode of an ICLID phone.
[0] = None [1] = Button Incoming Ringing @ 480 ipm
[2] = Voice Mail @ 240 ipm [3] = Message Wait @ 60 ipm [4] = Headset @ Steady
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Light Control is set for None.
Conditions
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
Message Wait
Stations that are busy, unattended and ringing, or in DND can be left a message indication by
other stations in the system. Up to five messages can be left at one keyset. Upon return to the
station, the user can answer the message waiting indication of each party in sequential order.
To leave a message waiting indication:
1. Lift the handset or press the ON/OFF button.
2. Dial the desired intercom station.
3. Press the MSG button or use the Soft Key’s MSG option. A confirmation tone will sound.
The called party's MSG button will flash slowly.
4. Replace the handset, or press ON/OFF to end the call.
To answer a message waiting indication:
If your MSG button is lit and/or you have an LCD display of
“MSG: XXXX”, you have a message waiting for you. The first message left is the first one called.
1. Press the MSG button or dial [663]. The station that left message will be signaled with
tone ringing.
2. If the called station does not answer, press the MSG button once if you want to leave that
station a message waiting indication.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE B
ENTER BUTTON NUMBER
SXXX PAGE B
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
LIGHT CONTROL 0-4
NONE