Specifications

2-210 ISDN Programming - Page B
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Programming Steps
1. Press the ISDN flexible button (FLASH 80, Button #15). The following message displays:
2. Press the HOLD button. A confirmation tone sounds.
Print ISDN Parameters
Description
The Print ISDN command dumps the entire database as a permanent record which can serve
as a hard copy of the database. The system baud rate must match that of the printer or
receiving device.
When printing the ISDN Timers, the following data is printed:
 ISDN Parameters and Timers
PAGE B 1 Maximum Number Retransmission 3
2 Maximum Octets 260
3 Maximum TEI ID Request 003
4 Maximum XID Retransmission 3 sec
5 T-200 01 sec
6 Minimum TEI ID Check Message 01 sec
7 Minimum TEI ID Request 02 sec
8 Message Exchange Timer 15 sec
9 Minimum XID Retransmission 3 sec
10 Inter Digit T/O 25 sec
11 Set-up Timer 10 sec
12 Disconnect Timer 04 sec
13 Release Request 04 sec
14 Link Disconnect 30 sec
15 Call Proceeding 60 sec
16 Connect Request 04 sec
17 Restart Request Timer 120 sec
INITIALIZE ISDN
PRESS HOLD
Table 2-18: ISDN Parameter Defaults
Program
Code
Flexible
Button
Features
Default Value
(after initialization)