Specifications

ISDN Programming - Page B 2-209
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Restart Request Timer
Description
Do not change the Restart Request Timer setting unless advised to do so by Technical
Support.
Programming Steps
1. Press the RESTART REQ TIMER flexible button (FLASH 45, Page B, Button #17).
2. Enter a valid number (0-200 seconds) on the dial pad.
3. Press the HOLD button. A confirmation tone sounds and the display updates.
DEFAULT … Restart Request Timer setting is 120 seconds.
Initialize ISDN Parameters
Description
The ISDN Parameters may be initialized setting all data fields to their original, default values.
RESTART REQ TIMER 0-200
T316 120
Table 2-18: ISDN Parameter Defaults
Program
Code
Flexible
Button
Features
Default Value
(after initialization)
FLASH 45
PAGE A
ISDN PARAMETERS
2PRI CO Type NI2
3Framing ESF
5 Power Disabled
6 Directory Number None
7 Max Out I-Frames K 001
8 Leading 1 Enabled
9 Leading 011 Enabled
10 PRI 7/11 Digit Number Plan ITU
11 Calling Number Enabled
12 Loopback Normal