Specifications

ISDN Programming - Page B 2-205
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Minimum TEI ID Check Message
Description
The Minimum TEI ID Check Message feature sets the minimum time between retransmission
of the TEI identity check messages. Do not change the Minimum TEI ID Check Message
setting unless advised to do so by Technical Support.
Programming Steps
1. Press the MIN TEI ID CHK MSG flexible button (FLASH 45, Page B, Button #6).
2. Enter a valid number (00-99 seconds) on the dial pad.
3. Press the HOLD button. A confirmation tone sounds and the display updates.
DEFAULT … Minimum TEI ID Check Message setting is 1 second.
Minimum TEI ID Request
Description
This feature is reserved for future use.
Programming Steps
1. Press the MIN TEI ID RQST flexible button (FLASH 45, Page B, Button #7).
2. Enter a valid number (00-99 seconds) on the dial pad.
3. Press the HOLD button. A confirmation tone sounds and the display updates.
DEFAULT … Minimum TEI ID Request setting is 2 seconds.
Message Exchange Timer
Description
The Message Exchange Timer setting establishes the maximum time allowed without frames
being exchanged. Do not change the Message Exchange Timer setting unless advised to do
so by Technical Support.
Programming Steps
1. Press the MSG EXCHANGE TIMER flexible button (FLASH 45, Page B, Button #8).
2. Enter a valid number (00-99 seconds) on the dial pad.
MIN TEI ID CHK MSG 00-99
T201 01
MIN TEI ID RQST MSG 00-99
T202 02
MSG EXCHANGE TIMER 00-99
T203 15