Specifications

2-196 ISDN
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
4. Press button #21. The display updates to reflect current programming for Page C.
5. Press Button #8. The following message displays:
6. Dial the station number (seven to ten digits).
7. Press the HOLD button. A confirmation tone sounds and the display updates
Conditions
» This feature does not apply to CO to CO calls.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX - XXX PAGE C
ENTER BUTTON NUMBER
SXXX PAGE C
ENTER BUTTON NUMBER
XXX-XXX = fixed station range XXX = 3- or 4-digit flexible number
OUTBOUND DID NUMBER
To prevent a previously programmed station number from displaying by this feature,
use Flash 50/51, Page C, Button #8 and press HOLD.
The Outbound DID Number On PRI feature does not work if the call is processed
through a network before dialing out. The feature will work if a call is dialed out directly
from a hub or node over its own Telco PRI line.