Specifications

ISDN 2-191
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Name/Number Display When Using PRI
Description
This feature provides the capability to display the caller’s name (up to 15 characters) when
inbound calls are received using PRI.
The specific LCD display obtained is based upon the type of signaling used and other
variables described in the examples and in the Conditions section for this feature.
When using DNIS or ANI signaling (FLASH 40, Page B, Button #1), if the Calling Party Number
matches the Name/Number Translation Table, then the upper two LCD examples in either
Figure 2-13 or Figure 2-14 applies. If the Calling Party Number does not match the Name/
Number Translation Table, but does match the DID Translation Table, then the upper two LCD
examples in either Figure 2-15 or Figure 2-16 applies.
Examples are based on this scenario:
 Incoming PRI call 614-6100 from an SLT with the telephone number of 480-991-8569 and
the name of ABC Technology Co
 Incoming call (DID number - 3 digits)
 Name in DID Translation Table is George (FLASH 44)
 Name in Name/Number Translation Table is Vodavi Comm Systems (FLASH 55)
Figure 2-12: Display Examples (Using DID Signaling)
100 ABCTECHNOLOGYCO
L INE 023 08 : 52 am
FLASH 41, Button #9 Enabled
100 GEORGE
L INE 023 08 : 52 am
FLASH 41, Button #9 Disabled
DID
NUMBER
CALLING PARTY
NAME - last 15
digits of row
NAME FROM DID
TRANSLATION
TABLE - up to
eight digits