Specifications

2-172 Group Listening
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
» If no VM ID digits are programmed in the station field, the flexible number assigned to
the station will be sent to the VM unit.
» Flash 06, Button #15 is the programming area to automatically assign the VMID digits to
be the same as the flexible station numbering.
» The SMDR will output 4-digit numbers in the station field. If less than 4 digits is selected
in the numbering plan, leading spaces will be added in place of the numbers. The 3-4
digit SMDR programming area will be removed from programming.
» The programming will print out as part of the CO-STA port programming area. The
flexible numbering can be initialized in the CO-STA initialization area.
Station Port Inquiry
Description
When using flexible numbering, some programming steps require the fixed code. This
feature allows you to dial a feature code to reveal the fixed port for your station.
Operation
Dial feature code [611]. The fixed Station/Port Number for your station displays.
Group Listening
Description
All digital key stations have a built-in speakerphone. Station users may use the speaker to
monitor a call while using the handset to converse with the outside party. This enables other
people in the room to listen to both parties in the conversation.
Programming Steps
1. Press the GROUP LISTENING flexible button (FLASH 05, Button #9).
2. Enter a 0 or 1 that corresponds with the following entries:
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Group Listening is disabled.
STATION PORT:
XXX
This feature is not available when the station is in headset mode.
GROUP LISTENING 0-1
DISABLED