Specifications

Flexible Numbering 2-171
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Flexible Numbering
Description
The Flexible Numbering feature allows the system numbering plan to be modified from its
default value (refer to “Default Numbering Plan” on page F-16) to accommodate specific
customer requirements. Station, Pilot, and Feature Access Code numbers may be changed
with this feature. The length of these numbers may also be modified to meet specific
customer applications.
Programming Steps
Press FLASH and dial [52]. The following message displays:
To select a Fixed or Flexible Code:
1. Press Button 24 (Fixed) or Button 21 (Flexible).
2. Enter the desired code to change.
3. Press HOLD. The fixed and flexible number, as well as a description of the code, displays
on the LCD.
To change a Flexible Code:
1. Select the desired code.
2. Press Button 1. The red LED illuminates.
3. Delete the flexible number by pressing button 2 and then pressing HOLD. The flexible
number field will be blank.
4. Enter the new code (2-4 digits).
5. Press HOLD.
To erase a Flexible Code:
1. Select the desired code.
2. Press Button 1 (must be lit).
3. Press Button 2.
4. Press HOLD.
Conditions
» Feature access codes cannot conflict with station numbering.
» CO line numbers are fixed and cannot be changed.
FIX: 100 FLEX: 100
NAME: STATION 100
You can scroll through the codes by using the PREVIOUS button (23) or the NEXT
button (22).
Station/Pilot numbers can only contain 0-9.
Feature codes can contain 0-9, *, #.