Specifications

2-162 Fixed Station/Port Number
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Fixed Station/Port Number
Description
When a station dials the feature code 611 on a display telephone, it will display the Fixed
Station/Port Number for that telephone. For example, when using flexible numbering some
programming steps require the “FIXED” code. This code allows you to dial 611 and quickly
determine the fixed port for that station.
 SINGLE LINE TELEPHONE
Not applicable
Flash Rates (Programmable)
Description
Fixed and flexible button flash rates can be programmed. Nineteen features/functions can be
programmed to use on of 14 different red or 14 different green flash rate options. These are
set up in FLASH 07 of admin programming. Refer to section that covers the feature/function
for the detailed programming steps.
All other flash rates in the system are fixed (defaulted).
When in FLASH 07, the buttons on the digital telephone are mapped as shown in the
following illustration.
STATION PORT:
XXX
Table 2-15: Button Map for Flash Rate Functions
Button # Feature/Function Button # Feature/Function
1 INC CO RING 12 EXCLUSIVE HOLD
2 INC ICW RING 13 SYSTEM HOLD
3 CALL FORWARD BTN 14 IN USE HOLD
4MSG WAIT/VM BTN 15CAMP ON BTN
6 DND DSS/BLF 16 CALLBACK BTN
7 AUTO CBCK DSS/BLF 17 LINE QUEUE BTN
8 UCD UNAVL DSS/BLF 18 DND BTN
9 TRANSFER CO RING 20 UCD WRAPUP END
10 RECALL CO RING 21 DND PAGE BLOCK
11 QUEUED CO RING 22 IN & OUT