Specifications

2-146 Distinctive Ringing
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
The ringing choices are as follows:
Conditions
» Station users may listen to all tones by dialing the 2-digit codes one after another. The
tone that is sounding when the SPEED button is pressed is saved as that station’s tone
ringing selection.
» A station’s tone ringing selection is maintained in a battery protected area of memory.
Therefore, if a system experiences a power failure or a soft or hard restart, the tone
ringing selection is restored.
» The tone selected provides TONE ringing normal or muted to the station whenever the
station is commanded to tone ring (i.e., this excludes Camp On tone programming
confirmation tones or other specific tones not considered TONE ringing).
» The selected tone is used to notify the station in the following cases:
- Incoming CO Call
- Incoming Intercom Call
- Transferred CO Line
- Recalling CO Line
- Call Back Notification
- Message Wait Call Back
- All Types of Forwarded Calls
- Executive/Secretary calls
- Line Queue Call Back
- LCR Queue Call Back
» CO Line Distinctive Ring Tone supersedes station ring tone and Call Coverage Distinctive
Ringing.
Table 2-13: Ringing Tones
Tone# Freq Tone# Freq Tone# Freq Tone # Freq
00 697/770 10 770/1209 20 852/0 30 1336/1477
01 697/852 11 770/1336 21 941/1209 31 1336/1633
02 697/941 12 770/1477 22 941/1336 32 1336/0
03 697/1209 13 770/1633 23 941/1477 33 1477/1633
04 697/1336 14 770/0 24 941/1633 34 1477/0
05 697/1477 15 852/941 25 941/0 35 1633/0
06 697/1633 16 852/1209 26 1209/1336 36 No Ring
07 697/0 17 852/1336 27 1209/1477
08 770/852 18 852/1477 28 1209/1633
09 770/941 19 852/1633 29 1209/0
Tone Duration = 50 ms/50 ms