Specifications

2-122 Direct Inward Dialing
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Universal Night Answer (UNA) / Universal Day Answer (UDA)
Description
This feature will allow calls that use the route table to be picked up by stations not normally
assigned access to the line(s) by dialing feature code [#5]. This station must have a direct CO
appearance or an available loop key assigned to do this.
Programming Steps
1. Press FLASH and dial [43]. The Button #1 LED is illuminated and the following message
displays:
000 = Route Number (000-251)
DDDD = 3- or 4-Digit Ringing Destination Number
R = Ringing Type
2. Enter a valid number for the route to be programmed.
3. Press the UNIVERSAL DAY ANSWER flexible button (Button #8).
4. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
5. Press HOLD to save the entry. A confirmation tone sounds.
6. Press the UNA flexible button (Button #9).
7. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
8. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … UDA is disabled and UNA is enabled.
Operation
Upon hearing an incoming signal:
1. Lift handset.
2. Dial the UDA/UNA access code [#5] on the dial pad. You are connected to ringing outside
line.
ROUTE 000 DDDDRR
UNIVERSAL DAY ANSWER 0-1
DISABLED
UNA 0-1
DISABLED