Specifications

Conference 2-101
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Conference
Description
The two types of conferencing are the multi-party conference and the unsupervised
conference.
Multi-party conference - can include up to eight parties. A maximum of five external parties
can be conferenced.
Unsupervised Conference - the conference initiator can exit a conference with two outside
parties and leave them in an unsupervised conference. The initiator can re-enter the
conference at any time. The STSe can automatically terminate the call when both parties
hang up, when Loop Supervision is provided by the Telco and enabled in the database. A
programmable conference timer disconnects the unsupervised conference if the initiator
does not re-enter.
Conference Enable/Disable
Description
The Conference Enable/Disable feature allows administering of the system conference
feature on a per station basis for the ability of a station to initiate a conference.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
STATION ATTRIBUTES
SELECT A STATION RANGE
ENTER STATION NUMBER
If HOLD is pressed without entering a station range, all stations are selected.