Programming instructions

ManualsBrandsVodavi ManualsConsumer electronicsInfostar VX2

: [FJ]Clear

rrj-,, [21 ,

[31 , [41 , 151 , ISI , [71 [31 , [aI

-----

-p--p

-----

System Administration

[PERSONAL GROUP MEMBER SCREEN]

CMP: BOX: GROUP: NAME:

-I-

[FS]Run Or Save

[FB]D~~

[Esc]Quit

Figure 4-6 Personal Group Members Programming Screen

‘;

Press the

ESCAPE

key. The Group List menu appears.

8. Press 4. The Personal Group Members screen appears. See Figure 4-6.

9. Enter

EXC

for the company. The cursor moves to Box.

10. Enter the mailbox number this list is being established for, then press the

RETURN

key. The cursor

moves to Group.

11. Enter the number of the group you just established, and press the

RETURN

key. The cursor moves to

the first member position, and displays the name of the group (from the Name field of the previous

screen).

12. Enter the mailbox numbers that are to be members of this group, pressing the

RETURN

key after each

one. If you make a mistake use the backspace key to correct it. If you notice a mistake in a previously

programmed mailbox, use the arrow keys to move to it. Press

to erase the mailbox field and start

over. After the mailbox has been entered, the mailbox number and the last name of the subscriber

appear at the lower left edge of the screen.

13. When all the desired mailboxes have been entered, press the

key (save), then press Y to confirm.

14. To enter another group, move the cursor to Group, press the

key, and enter the new group to be

programmed. The group must have already been established using the Personal Group programming

screen.

15. To return to the Main Menu, press the

ESCAPE

key, then press 8.

4.6

INFOSTARIVX2

System Administrator’s Manual

revised 7191