Programming instructions

System Administration
10. Enter the mailbox numbers that are to be members of this group, pressing the RETURN key after each
one. If you make a mistake use the backspace key to correct it. If you notice a mistake in a previously
programmed mailbox, use the arrow keys to move to it. Press Fl to erase the mailbox field and start
over. After the mailbox has been entered, the mailbox number and the last name of the subscriber
appear at the lower left edge of the screen.
11. When all the desired mailboxes have been entered, press the F5 key (save), then press Y to confirm.
12. To enter another group, move the cursor to Group, press the Fl key, and enter the new group to be
programmed. The group must have already been established using the System Group programming
screen.
13. To return to the Main Menu, press the ESCAPE key, then press 8.
[SYSTEM GROUP HEADER SCREEN]
COMPANY:
CROUP: -
MEMBERS:
NAME:
=[F3]Clear [FB]Save [FB]D~~ [F7]Scroll [FI]Find [Fg]Prev [FlO]Next [Esc]Quit
Figure 4-3 System Group Programming Screen
INFOSTARIVX2
System Administrator’s Manual
revised 7191
4.3