Programming instructions

Mailboxes
Type 15
Type 200
Type 201
Type 202
Type 300
Type 301
Type 302
Type 303
Type 304
Type 305
Type 306
Type 307
Type 308
Type 309
Type 310
Type 311
Type 312
Type 313
Type 314
Type 400
Type 401
this is a special type to be used when CCR is to route callers to a specific mailbox. The
DTMF digit used in CCR to reach a mailbox with this type is taken as the leading digit in
the mailbox number. The system waits for the remaining digits to be dialed (based on the
number of digits in a mailbox number from the PBX Parameters screen) then routes the
call to that mailbox.
this is a listen only mailbox. Calls to mailboxes with this type hear the mailbox greetings,
and are then disconnected. The mailbox greetings are played in order (greeting 1, greet-
ing 2, etc.)
this is a listen and reply mailbox. Calls to mailboxes with this type hear the mailbox
greeting, and are then prompted to leave a message.
this is a listen and transfer mailbox. Calls to mailboxes with this type hear the mailbox
greeting, and are then transferred to the extension programmed as attendant for the mail-
box.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 1 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 1 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 2 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 3 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 4 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 5 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 6 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 7 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 8 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 9 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 10 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 11 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 12 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 13 Message 1.
calls to mailboxes with this type are routed to the Custom Call Routing scheme beginning
with Record 14 Message 1.
calls to mailboxes with this type are routed to the starting point for Auto Attendant with-
out spell by name. This is equivalent to
“T AUTO1 0001” on the Run Dialogue screen,
calls to mailboxes with this type are routed to the starting point for Auto Attendant with
spell by name. This is equivalent to
“T AUTOS 0001” on the Run Dialogue screen.
3.10
INFOSTARIVX2
System Administrator’s Manual